- 您现在的位置：买卖IC网 > Sheet目录1168 > 71M6534H-DB (Maxim Integrated Products)BOARD DEMO 71M6534H
FDS_6533_6534_004
71M6533/G/H and 71M6534/H Data Sheet
External MPU Interrupts
The seven external interrupts are the interrupts external to the 80515 core, i.e. signals that originate in
other parts of the 71M6533/71M6534, for example the CE, DIO, RTC, EEPROM interface.
The external interrupts are connected as shown in Table 30 . The polarity of interrupts 2 and 3 is
programmable in the MPU via the I3FR and I2FR bits in T2CON . Interrupts 2 and 3 should be programmed
for falling sensitivity ( I3FR = I2FR = 0). The generic 8051 MPU literature states that interrupts 4 through 6
are defined as rising-edge sensitive. Thus, the hardware signals attached to interrupts 5 and 6 are inverted
Table 30: External MPU Interrupts
External
Interrupt
0
1
2
3
4
5
6
Connection
Digital I/O High Priority
Digital I/O Low Priority
FWCOL0, FWCOL1, SPI
CE_BUSY
PLL_OK (rising), PLL_OK (falling)
EEPROM busy
XFER_BUSY, RTC_1SEC or WD_NROVF
Polarity
see Section 1.5.7
see Section 1.5.7
falling
falling
rising
falling
falling
Flag Reset
automatic
automatic
automatic
automatic
automatic
automatic
manual
External interrupt 0 and 1 can be mapped to pins on the device using DIO resource maps. See Section
1.5.7 Digital I/O for more information.
FWCOLx interrupts occur when the CE collides with a flash write attempt. See the flash write description
in the Flash Memory section for more detail.
SFR enable bits must be set to permit any of these interrupts to occur. Likewise, each interrupt has its own
flag bit, which is set by the interrupt hardware, and reset by the MPU interrupt handler. XFER_BUSY,
RTC_1SEC, WD_NROVF, FWCOL0, FWCOL1, SPI, PLLRISE and PLLFALL have their own enable and
flag bits in addition to the interrupt 6, 4 and enable and flag bits (see Table 31 ).
IE0 through IEX6 are cleared automatically when the hardware vectors to the interrupt handler. The other
flags, IE_XFER through IE_PB , are cleared by writing a zero to them.
Since these bits are in an SFR bit addressable byte, common practice would be to clear them
with a bit operation, but this must be avoided . The hardware implements bit operations as a
byte wide read-modify-write hardware macro. If an interrupt occurs after the read, but before
the write, its flag will be cleared unintentionally.
The proper way to clear the flag bits is to write a byte mask consisting of all ones except for a
zero in the location of the bit to be cleared. The flag bits are configured in hardware to ignore
ones written to them.
Table 31: Interrupt Enable and Flag Bits
Interrupt Enable
Name Location
Interrupt Flag
Name Location
Interrupt Description
EX0
EX1
EX2
EX3
EX4
EX5
EX6
SFR A8[0]
SFR A8[2]
SFR B8[1]
SFR B8[2]
SFR B8[3]
SFR B8[4]
SFR B8[5]
IE0
IE1
IEX2
IEX3
IEX4
IEX5
IEX6
SFR 88[1]
SFR 88[3]
SFR C0[1]
SFR C0[2]
SFR C0[3]
SFR C0[4]
SFR C0[5]
External interrupt 0
External interrupt 1
External interrupt 2
External interrupt 3
External interrupt 4
External interrupt 5
External interrupt 6
Rev 2
33
发布紧急采购，3分钟左右您将得到回复。
相关PDF资料
71M6541F-DB
DEMO BOARD 71M6541F
71M6543F-DB-CT
DEMO BOARD 71M6543F-DB-CT
72-CNV-5
CONVERTER RS-232 TO RS-422 5V
72346-001
72346-1-SCA-II REC
72347-001LF
CONN RECEPT SCA2 20POS VERT PCB
72436-001LF
80POS EXT HT. REC SCA-2
72442-201LF
CONN RECEPT SCA2 80POS VERT PCB
72512-001
5 X 12 COVERS
相关代理商/技术参数
71M6534H-IGT/F
功能描述:计量片上系统 - SoC Precision Energy Meter IC RoHS:否 制造商:Maxim Integrated 核心:80515 MPU 处理器系列:71M6511 类型:Metering SoC 最大时钟频率:70 Hz 程序存储器大小:64 KB 数据 RAM 大小:7 KB 接口类型:UART 可编程输入/输出端数量:12 片上 ADC: 安装风格:SMD/SMT 封装 / 箱体:LQFP-64 封装:Reel
71M6534H-IGTR/F
功能描述:计量片上系统 - SoC Precision Energy Meter IC RoHS:否 制造商:Maxim Integrated 核心:80515 MPU 处理器系列:71M6511 类型:Metering SoC 最大时钟频率:70 Hz 程序存储器大小:64 KB 数据 RAM 大小:7 KB 接口类型:UART 可编程输入/输出端数量:12 片上 ADC: 安装风格:SMD/SMT 封装 / 箱体:LQFP-64 封装:Reel
71M6534H-IGTR/F1
功能描述:计量片上系统 - SoC Precision Energy Meter IC RoHS:否 制造商:Maxim Integrated 核心:80515 MPU 处理器系列:71M6511 类型:Metering SoC 最大时钟频率:70 Hz 程序存储器大小:64 KB 数据 RAM 大小:7 KB 接口类型:UART 可编程输入/输出端数量:12 片上 ADC: 安装风格:SMD/SMT 封装 / 箱体:LQFP-64 封装:Reel
71M6534-IGT/F
功能描述:计量片上系统 - SoC Precision Energy Meter IC RoHS:否 制造商:Maxim Integrated 核心:80515 MPU 处理器系列:71M6511 类型:Metering SoC 最大时钟频率:70 Hz 程序存储器大小:64 KB 数据 RAM 大小:7 KB 接口类型:UART 可编程输入/输出端数量:12 片上 ADC: 安装风格:SMD/SMT 封装 / 箱体:LQFP-64 封装:Reel
71M6534-IGTR/F
功能描述:计量片上系统 - SoC Precision Energy Meter IC RoHS:否 制造商:Maxim Integrated 核心:80515 MPU 处理器系列:71M6511 类型:Metering SoC 最大时钟频率:70 Hz 程序存储器大小:64 KB 数据 RAM 大小:7 KB 接口类型:UART 可编程输入/输出端数量:12 片上 ADC: 安装风格:SMD/SMT 封装 / 箱体:LQFP-64 封装:Reel
71M6541D
制造商:未知厂家 制造商全称:未知厂家 功能描述:71M6541D/71M6541F/71M6541G/71M6542F/71M6542G 是
TeridianTM 的第4 代高集成度单相电表SoC
71M6541D_1111
制造商:MAXIM 制造商全称:Maxim Integrated Products 功能描述:Energy Meter ICs
71M6541D-IGT/F
功能描述:计量片上系统 - SoC Precision Energy Meter IC
RoHS:否 制造商:Maxim Integrated 核心:80515 MPU 处理器系列:71M6511 类型:Metering SoC 最大时钟频率:70 Hz 程序存储器大小:64 KB 数据 RAM 大小:7 KB 接口类型:UART 可编程输入/输出端数量:12 片上 ADC: 安装风格:SMD/SMT 封装 / 箱体:LQFP-64 封装:Reel